Eaton Tripp Lite SMART1000RM2U 2U Rackmount Sine Wave UPS

If you run a small server rack, a network closet, or VoIP gear, this is the kind of UPS that prevents the annoying stuff from turning into real downtime. The Eaton Tripp Lite SmartPro SMART1000RM2U is a 120V, 1000VA 800W line interactive UPS that outputs a pure sine wave. That matters when you are protecting sensitive power supplies in switches, routers, NAS, and modern server hardware that can complain on rough power.

In day to day use, Automatic Voltage Regulation helps ride through brownouts and overvoltage without constantly switching to battery, which helps extend battery life and keeps operations steady. When the power actually drops, you get practical runtime for controlled shutdowns: about 15 minutes at half load and about 5.3 minutes at full load. The interactive LCD gives you fast visibility into load, battery status, and estimated runtime, and the display rotates so it reads cleanly in a rack or tower position.

For clean installations, you get six NEMA 5-15R outlets, a 10 ft power cord, and a 2U rack or tower footprint that fits common IT closets. The 570 joule surge rating and EMI RFI filtering help smooth out line noise and spikes that can cause weird device behavior over time. On the management side, you can monitor and automate via USB or DB9, and you have network card options if you want remote monitoring and alerts. It also includes two load banks with remote control, which is useful when you want to prioritize critical equipment or stage shutdown sequences.

What’s Included
UPS system (SMART1000RM2U)
Integrated LCD interface
USB and DB9 connectivity for monitoring (cables may vary by kit)
Attached 10 ft power cord

Benefits
You reduce downtime risk from outages, brownouts, and noisy power. You protect sensitive networking and server gear with sine wave output that plays nicely with modern power supplies. You get a rack friendly 2U form factor with clear status visibility and practical runtimes for clean shutdowns. You also get flexible monitoring now, and optional network management when you want to level up.

1. Is this UPS pure sine wave, and why should I care?
   Yes, it provides sine wave output. It is a better match for modern active PFC power supplies in servers, NAS, and networking gear, and it helps avoid buzzing, heat, or compatibility issues.
   
2. How long will it run during an outage?
   Roughly 15 minutes at half load and about 5.3 minutes at full load. Real runtime depends on what you plug in, so the LCD load readout is your best guide.
   
3. Can I manage it remotely over the network?
   Yes, it supports network card options for remote monitoring and alerts, plus it also supports local monitoring via USB or DB9.