WattBox WB-OVRC-UPS-1500-1 UPS Battery Pack 1500VA for IP Power Conditioners

UPS Backup for WattBox IP Power Conditioner Setups

The WattBox WB-OVRC-UPS-1500-1 is a 1500VA pure sinewave UPS battery pack designed to back up compatible WattBox IP power conditioners and protect critical rack equipment during outages and unstable power events.

Unlike a typical multi-outlet UPS, this model has one rear outlet intended to feed a compatible WattBox IP-enabled power conditioner. That paired setup helps unlock OvrC monitoring, battery health visibility, load-shedding configuration, and smarter power management for AV, networking, and control systems.

Best Use Cases

• WattBox IP power conditioner setups: Designed to back up a compatible WattBox IP-enabled power conditioner instead of plugging many devices directly into the UPS.
• AV racks: Helps protect receivers, processors, streamers, control gear, and supporting rack equipment through a properly planned WattBox power setup.
• Network closets: Useful for keeping routers, switches, modems, firewalls, and core network gear protected during short outages.
• Security camera systems: A strong fit for NVRs, routers, switches, and surveillance support equipment when connected through the right power conditioner layout.
• Control systems: Helps protect smart home controllers, automation processors, hubs, bridges, and connected rack devices.
• PC-based systems: Supports graceful shutdown through USB to help protect files, components, and connected computer systems during power loss.

Who Should Buy This?

This is a good choice if you already have, or plan to use, a compatible WattBox IP power conditioner and want battery backup with OvrC-aware monitoring and load shedding.

It makes the most sense for AV racks, network racks, security systems, smart home equipment, and small business setups where several devices are managed through a WattBox IP power conditioner, rather than plugged directly into a basic UPS.

Who Should Not Buy This?

This is not the right product if you are looking for a regular multi-outlet UPS where every device plugs directly into the battery backup unit. This model has one rear outlet and is designed around pairing with a compatible WattBox IP power distribution product.

This is also not the right choice if you only need surge protection, outlet control, or remote reboot without battery backup. For those needs, choose a WattBox surge protector, power conditioner, or smart IP power conditioner.

Do not use this UPS for appliances, heaters, laser printers, power tools, or other high-draw equipment that does not belong on an AV, network, or control-system UPS.

Compatibility Notes

• UPS type: Pure sinewave UPS battery pack for WattBox IP power conditioner setups.
• Capacity: 1500VA UPS capacity.
• Power rating: 1350W max load.
• Outlet count: Includes 1 rear outlet designed to power a compatible WattBox IP power conditioner.
• OvrC functionality: OvrC monitoring and load-shedding features are available when paired with a compatible WattBox IP-enabled power conditioner.
• Load shedding: Supports OvrC-based load shedding so critical and non-critical outlet behavior can be planned through the connected WattBox interface.
• AVR support: Automatic Voltage Regulation helps correct brownouts and over-voltage conditions without relying on battery every time.
• Voltage correction range: AVR helps prevent voltage drops below 112V and spikes or surges above 128V.
• USB shutdown: Supports graceful shutdown for compatible connected computer systems through USB.
• Noise handling: Includes EMI/RFI shielding to help reduce unwanted line noise and interference.
• Rack size: 2U rackmount design.
• Rack depth: Requires a 24-inch rack for proper mounting.
• Battery type: Sealed lead-acid battery design with user-replaceable battery support.
• Recharge time: Approximately 4 hours.
• Weight: Approximately 48.30 lb.

Installation Considerations

Before ordering, confirm the WattBox IP power conditioner you plan to pair with this UPS. The best setup is usually: wall power to the UPS, UPS output to the compatible WattBox IP power conditioner, and then critical rack devices connected to the managed outlets on the power conditioner.

Map the devices before installation. Decide which devices are critical, such as the modem, router, main switch, NVR, or control processor, and which devices can be shed earlier to extend runtime.

Because this is a 2U rackmount UPS with meaningful depth and weight, confirm rack depth, rack shelf or rail support, ventilation, outlet access, and total connected load before purchase.

Runtime Expectations

Runtime depends on the connected load. The official WattBox data sheet lists up to 5 1/2 minutes of battery backup at full load and 13 1/2 minutes at 50% load.

For most AV, networking, and security setups, the goal is not always to run everything for a long time. The goal is to keep the most important equipment online during short outages, avoid hard shutdowns, and use load shedding to prioritize the devices that matter most.

Why the One-Outlet Design Matters

This UPS is not built like a typical consumer UPS with several battery-backed outlets. The single rear outlet is designed to feed a compatible WattBox IP power conditioner.

That design makes more sense in managed rack systems because the IP power conditioner can control the connected equipment, apply load shedding, and help organize which devices stay powered longer during an outage.

Why OvrC Load Shedding Matters

In a rack, not every device is equally important during an outage. A router, switch, NVR, or control processor may be critical, while a streamer or secondary device may not be.

When paired with a compatible WattBox IP power conditioner, OvrC load shedding can help prioritize connected devices based on battery charge levels. That allows the system to keep important equipment running longer instead of draining the battery on everything equally.

Good Products to Pair With This UPS

• Smart Power Conditioners for compatible WattBox IP power conditioners and remote power management.
• WattBox Power Solutions for related WattBox UPS, power conditioners, surge protection, and rack power products.
• UPS Battery Backup to compare other UPS sizes and backup power options.
• Power Management Solutions for broader UPS, surge protection, and rack power planning.
• Network Switches if this UPS is supporting a wired or PoE network rack.
• Network Recorders NVRs if this UPS is part of a security camera recording system.
• Rack-Mount Power Strips & PDU for rack power distribution planning.

Need Help Confirming Compatibility?

If you are not sure whether this UPS fits your WattBox setup, send us the model number of your power conditioner and the list of devices in your rack. We can help you think through compatibility, load, runtime, OvrC load shedding, and whether this 1500VA model is the right size.

What is the WattBox WB-OVRC-UPS-1500-1 used for?

It is used to provide battery backup for compatible WattBox IP power conditioners and the AV, network, security, and control equipment connected through that managed power setup.

Is this a regular multi-outlet UPS?

No. This model has one rear outlet and is designed to power a compatible WattBox IP power conditioner. The connected rack devices are typically managed through the power conditioner, not plugged directly into multiple UPS outlets.

How many outlets does it have?

It includes 1 rear outlet designed to pair with a compatible WattBox IP-enabled power conditioner.

What is the capacity?

This model provides 1500VA capacity with a 1350W max load rating.

Is this a pure sinewave UPS?

Yes. It is a pure sinewave UPS, which is preferred for sensitive AV, network, control, and computer-based equipment.

Does this UPS work with OvrC?

Yes, but the key OvrC features are unlocked when the UPS is paired with a compatible WattBox IP-enabled power conditioner updated with the proper firmware.

What can OvrC show for this UPS setup?

When paired correctly, OvrC can help monitor battery health, charge percentage, voltage levels, current runtime, and load-shedding configuration.

What is load shedding?

Load shedding lets the system prioritize critical and non-critical devices based on battery charge levels. This can help keep the most important rack equipment running longer during an outage.

What does AVR do?

Automatic Voltage Regulation helps correct brownouts and over-voltage conditions without switching to battery unnecessarily. This helps protect connected equipment from unstable input voltage.

Does it support graceful shutdown?

Yes. The USB port supports graceful shutdown for compatible connected computer systems, helping save work and shut down properly during power loss.

How long will it run during an outage?

Runtime depends on the connected load. The official WattBox data sheet lists up to 5 1/2 minutes at full load and 13 1/2 minutes at 50% load.

Can I use this for a router and switch?

Yes, but the usual setup is to connect the UPS to a compatible WattBox IP power conditioner, then connect the router, switch, and other devices to the managed outlets on that power conditioner.

Can I use this for an NVR or camera system?

Yes. This can be a strong fit for NVR, router, switch, and security-system support equipment when the rack power layout is planned correctly.

Does it provide surge protection?

The official data sheet lists 1080 joules of energy dissipation. For broader rack protection and managed outlet behavior, pair it with the correct WattBox IP power conditioner.

Can I plug appliances, heaters, or laser printers into it?

No. Avoid appliances, heaters, laser printers, power tools, and other high-draw devices. This UPS is intended for AV, network, security, control, and computer-related electronics.

What should I check before ordering?

Check the compatible WattBox IP power conditioner model, connected load, rack depth, 2U rack space, runtime needs, load-shedding plan, and which devices should stay online during an outage.