8MP Monitoring with Long-Range Active Deterrence
The LTS LTCMIP9382WI-28SDL is an 8MP bullet IP camera designed for driveways, gates, yards, parking areas, entrances, and perimeter locations where detailed video, long-range illumination, human and vehicle detection, and visible deterrence are important.
8MP Image and Lens
- Maximum resolution: 3840 × 2160 at 20 fps
- 1/2.8-inch Progressive Scan CMOS sensor
- 2.8mm fixed lens
- F1.6 aperture
- 108° horizontal field of view
- 59° vertical field of view
- 127° diagonal field of view
- 120dB True WDR
- BLC, HLC, and 3D DNR image enhancement
Lower resolutions support up to 30 fps in a 60Hz configuration, while full 3840 × 2160 recording is specified at 20 fps.
Long-Range Smart Hybrid Light
Smart Hybrid Light combines infrared and white supplemental illumination with three lighting modes for flexible nighttime monitoring.
- IR and white supplemental lighting
- Maximum illumination range: 196 ft / 60 m
- 850nm infrared wavelength
- Minimum color illumination: 0.005 lux at F1.6 with AGC on
- 0 lux with IR illumination
Active Deterrence
- Red and blue flashing warning lights
- Built-in 2W speaker
- Speaker output up to 120dB at 10 cm
- Human and vehicle event detection
Human and Vehicle Detection
- Human and vehicle classification
- Motion detection with target-type filtering
- Line crossing detection
- Intrusion detection
Detection performance depends on camera placement, target size, lighting, scene conditions, and configuration.
Built-In Two-Way Audio
- Arrayed dual built-in microphones
- Environmental noise filtering
- Built-in 2W speaker
- 1 line-level audio input
- 1 line-level audio output
- 1 alarm input and 1 alarm output
The built-in microphones and speaker support compatible two-way audio through supported LTS software or recording equipment.
Recording and Network
- H.265+, H.265, H.264+, and H.264 compression
- Up to three video streams under supported settings
- microSD/microSDHC/microSDXC storage up to 512GB
- NAS storage support
- Auto Network Replenishment support
- ONVIF Profiles S and G
- RJ45 10/100 Ethernet
- NVMS V3, LTS Connect, and XVMS support
A compatible LTS NVR is recommended for the most complete integration of recording, analytics, audio, alarms, and active-deterrence functions.
Power Requirements
- PoE+: IEEE 802.3at, Class 4, maximum 18W
- Alternative power: 12V DC ±25%, maximum 17W
This is a wired Ethernet camera and does not include Wi-Fi. Make sure the connected NVR or PoE switch can supply IEEE 802.3at PoE+.
Outdoor Protection
- IP67 dust and water ingress protection
- Metal housing
- Operating temperature: -22°F to 140°F
IP67 does not mean the camera is intended for permanent underwater installation.
Dimensions and Mounting
- Dimensions: 3.5 × 3.7 × 11.3 inches
- Metric dimensions: 88.7 × 93.1 × 286.7 mm
- Weight: approximately 2.6 lb
- Pan adjustment: 0° to 360°
- Tilt adjustment: 0° to 90°
- Rotation: 0° to 360°
LTS lists the LTB801 junction box, LTB378 vertical pole mount, and LTB379 corner mount as compatible accessories. Mounting accessories and microSD card are sold separately.
Complete the System
Need Help Confirming Compatibility?
Send Bear Security Shop your NVR model, camera quantity, mounting location, and cable-run details. We can help confirm recorder compatibility, PoE+ capacity, storage, and mounting accessories.