Episode SIG-56-ICDVC 6 Inch Dual Voice Coil In-Ceiling Speaker

6 inch dual voice coil in-ceiling speaker that delivers stereo sound from one location, perfect when the room only allows a single cutout.

The Episode SIG-56-ICDVC solves the “one speaker only” problem without turning your audio into mono. Its dual voice coil design plays both left and right channels from a single ceiling speaker, making it a smart fit for kitchens, hallways, bathrooms, small offices, and commercial zones where placement is constrained but you still want balanced, full music.

Why installers choose this dual voice coil ceiling speaker

• Dual voice coil design delivers left and right channels from one speaker location
• Signature 5 Series tuning focuses on low distortion and balanced everyday listening
• Wide dispersion helps spread sound evenly across the room, not just under the speaker
• 90 dB sensitivity and an easy 8 ohm load match well with most multi-room amplifiers
• Push Lock by Swarm mounting speeds installs and keeps the speaker secure
• One-step or two-step install workflow supports both retrofit and new construction jobs
• Ribbed surround improves cone control for cleaner sound at typical listening levels

Best use cases

• Kitchens and small rooms where only one ceiling speaker location is practical
• Hallways, entryways, and bathrooms where a stereo pair would be awkward
• Home office and small commercial rooms needing clean background music coverage
• Distributed audio zones where simplicity and consistency matter across many rooms

Recommended with this product

• Episode to keep a consistent sound signature across additional rooms and zones
• In-Wall and In-Ceiling Speakers for adding more rooms while keeping the same architectural look
• Power Management Solutions to protect the amplifier and sources feeding your audio system
• Multi-room amplifier channels sized correctly for your total speaker count and zoning

Quick guidance

Use this model when you need stereo content from a single ceiling location. Wire both amplifier channels to the dual voice coil inputs, then set expectations, it will sound far more balanced than a single-channel speaker, but it cannot create the same left-right imaging as two separated speakers. If you share the room size and where the cutout must be, contact us and we will recommend placement and the right amplifier approach for clean coverage.

1. What does “dual voice coil” mean on a ceiling speaker?
   A dual voice coil speaker has two separate coils, so one speaker can reproduce both left and right channels. It is ideal when you only have space for one in-ceiling speaker but still want stereo content.
   
2. Can I use the SIG-56-ICDVC as a replacement for a normal in-ceiling speaker?
   Yes. You can wire it for your intended use case, but the main advantage is when you want stereo from one location. If you have two speaker locations available, a traditional left and right pair is still the best stereo experience.
   
3. Will this work with standard whole-home audio amplifiers?
   In most installs, yes. It is an 8-ohm speaker with 90dB sensitivity, which typically pairs well with common multi-zone and distributed audio amps. Always confirm your amplifier channel requirements and wiring plan before final hookup.